Epson ColorPage EPL-C8000 Service Manual page 14

Revision Issued Date
Rev. 0 August 07, 1998
(Preliminary revision)
Rev. A September 28, 1998
Rev. B August 23, 1999
Revision Status
Description
1st release
2nd release
The manual is mainly revised on the following points:
[Chapter 1]
• Page 1-4: Paper Out Sensor is added.
• Page 1-6: IBT Cleaner is eliminated from the regularly replaced parts.
• Page 1-30: NOTE is added to Section 1.5.4.
[Chapter 3]
• Page 3-2: Change in Table 3-1.
• Page 3-6: NOTE is added to Section 3.2.3.1 under "Preparation".
• Page 3-96: Section 3.2.12.21 "FUSER IN SENSOR Removal" is added.
• Page 3-97: Section 3.2.12.22 "FUSER CHUTE FAN Removal" is added.
• Page 3-119: CHECK POINT box is added.
• Page 3-121: New adjustment item "DEVE. SPACER Selection" is added.
[Chapter 4]
• Page 4-1: Change in the procedure for Test Print my MCU PWB.
• Pages 4-3, 4-7, 4-61: DIAGNOSTIC DATA DISK is replaced by SELF
TRAINING KIT (#F728).
[Chapter 7:]
• Fuser relating exploded diagrams and controller are mainly replaced.