Used Cart. Sensor Removal (Pl7.2.30) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.10.7 USED CART. SENSOR Removal (PL7.2.30)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Disconnect the connector P/J87 and P/J197 for the USED CART.
SENSOR and the FRONT COVER SWITCH L, respectively, and
release the harnesses from the USED SENSOR PLATE.
3. Remove the screw (gold, tapped, 8mm) securing the USED
SENSOR ASSEMBLY and remove the USED SENSOR
ASSEMBLY.
4. Remove the screw (gold, tapped, 8mm) securing the USED CART.
SENSOR and remove the USED CART. SENSOR from the USED
SENSOR PLATE.
Route the harness tightly via the USED SENSOR PLATE
and the hook in the ROTARY LATCH ASSEMBLY.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-75. USED CART. SENSOR Removal
Revision B
3-65