Ros Assembly Removal (Pl6.1.1) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.9.3 ROS ASSEMBLY Removal (PL6.1.1)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove 8 screws (silver, cup head, 6mm) securing the ROS
COVER and remove the ROS COVER.
3. Disconnect 3 connectors (P/J121, 122, and 124) for the ROS
ASSEMBLY.
NOTE: In the following step, ROS ASSEMBLY is kept connected to
the XL RAIL ASSEMBLY with the harness. Do not move the
ROS ASSEMBLY to away from the XL RAIL ASSEMBLY.
NOTE: In the following steps, keep your hands away from the
window part of the ROS ASSEMBLY, where laser beam is
emitted, and other functioning parts such as motor shaft.
4. Remove 4 screws (black, cup head, 12mm) securing the ROS
ASSEMBLY and remove the ROS ASSEMBLY from the printer.
5. Remove the connector (P/J123) at bottom of the ROS ASSEMBLY
and remove the ROS ASSEMBLY carefully.
n Keep the harness away from the motor shaft of the
Scanner assembly in the ROS ASSEMBLY.
n Do not get the harnesses caught between the ROS
ASSEMBLY and the frame.
Chapter 3 Disassembly and Assembly/Adjustment
Window part
Figure 3-60. ROS ASSEMBLY Removal (2/2)
Revision B
3-53