Nvm List - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

4.2.6.15 NVM List


The NVM numbers that are not listed in the table
below are used by the system. Do not write data in
those NVM numbers.

Do not modify any NVM number with an "X" in the
Access Permission Yes/No column unless instructed
to do so. These NVM numbers are critical to the
system settings.

Before replacing the MCU PWB, read and record the
data in the NVM numbers with an * (asterisk) and write
the data in those NVM numbers.
NOTE: The default values (Hex) may differ depending on the
specification of the printer.
Chapter 4 DIAGNOSTICS
Table 4-39. NVM List (1/8)
EEPROM Read [90 05 XX XX],
EEPROM Write [90 06 XX XX XX XX XX XX]
Access NVM
Permission Number
Yes/No (Hex)
MCU PWB Version
0
(Read only)
(0000)
0F: Firmware version
Fuser dummy rotation
(Belt Cycle)
1
Number of dummy rotations
x
(0001)
for continuous printing in
each color mode (plain
paper)
3 Top registration adjustment
(0003)
Registration loop amount:
4 time adjustment
x
(plain paper)
(0004)
Registration loop amount:
5 time adjustment
x
(thick paper)
(0005)
]
Oil Roll Advance/Retract
6 control counter: Clear time
x
setting (1)
(0006)
Registration loop amount:
7
time adjustment (envelope)
x
(0007)
Fuser Exit On Jam (C4-20-
8 00): time adjustment
x
(0008)
Range
Function
(Hex)
Data Unit
(0F)
-
0 - 4
(00 - 04)
Belt
circumfere
nce
-12 - +28
(F4 - 1C)
6.91msec
-5 - +5
(FB - 05)
6.91msec
-5 - +5
(FB - 05)
6.91msec
1 - 10
(01 - 0A)
1 min
-12 - -2
(F4 - FE)
6.91 msec
-10 - +10
(F6 - 0A)
48.37
msec
Rev. B
Default
(Hex)
-
1
(01)
4
(04)
-3
(FD)
0
(00)
5
(05)
-7
(F9)
3
(03)
4-40