Process Specifications; Applicable Standards - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

1.2.7 Process Specifications

o Printing method:
Dry electrophotographic with 2 ingredients
Using the intermediate belt transfer
system
o Light source:
Semi-conductive laser beam
o Exposed object:
OPC drum (organic photo conductor)
o Charging method:
Roller transfer system
o Developing method:
Exposed part developing system
o Toner:
Single-ingredient nonmagnetic toner with
carrier
o 1st transfer:
Intermediate belt transfer system
o 2nd transfer:
Roller transfer system
o Fusing:
Heat roller system
o Density adjustment:
Automatic (can not be set by user)

1.2.8 Applicable Standards

o Safety Standards
n 100V/120V:
UL1950 2nd Edition, CSA C22.2 No. 950-M89
n 220V/240V:
IEC950 2nd Edition/1991 by VDE with GS-mark
o Safety regulations:
n 100V/120V:
FDA21CFR Chapter 1, Subchapter L, Section 1010, 1040
Chapter 1 PRODUCT DESCRIPTIONS
n 220V/240V:
IEC825 Class l Laser Product
Note: Laser power: 5mW (rated)
Wavelength: 785nm 10/-15nm (at 25 C)
o EMI
n US:
FCCPart15 SubpartB, ClassB(ANSI 63.4/11.4D)
n Europe:
EN55022(CSIPR Pubilication22), ClassB or
EN61000-3-2 (Hamonics)*
EN61000-3-3 (Flicker)*
* Becomes effective in January, 2001
o Others
n Toner:
No effect on human health (OSHA, TSCA, EINECS)
n Carrier:
No effect on human health
n OPC:
No effect on human health (OSHA)
n Ozone:
UL478 (5th edition)
n Material:
SWISS environmental law (must contains no Cds)
Rev. B
1-16