Wiring Diagram - §2 - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000
A.3.3.2 Wiring Diagram - §2
Table A-21. Signal Description - §2
Signal Name
LED ON (L) 5VDC Control signal to turn the LED ON/OFF in the ADC
Sensor (ADC Sensor Assembly).
ADC SIG Measurement signal from the ADC Sensor (ADC
Sensor Assembly). (Analog)
ADC SOLENOID ON (L) Control signal to turn the ADC Solenoid (ADC Sensor
24VDC Assembly) ON/OFF.
ERASE LAMP ON (H) 5VDC Control signal to turn the LED ON/OFF in the Erase
Lamp Assembly.
WASTE TONER SENSED Signal from the Waste Toner Sensor to detect the full
(H) 5VDC Waste Toner Box.
TONER BOX SENSED (L) Signal from the Toner Box Sensor to detect the Waste
5VDC Toner Box (Low: Waste Toner Box/High: No Waste
Toner Box).
CRUM DATA Write/read data to/from the Crum Assembly (Drum
Cartridge).
CRUM CLOCK Clock signal in the Crum Assembly (Drum Cartridge).


ADC SIG signal
The voltage on the normal drum surface without a toner image is
about 3.5VDC.


ADC Solenoid coil resistance: 36
Chapter A APPENDIX
Description
10% (20 C)
Rev. B
A-35