Removing/Replacing The Consumables; Updating The Program Rom - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000
(1)
(2)
(1) MAIN FUSER ASSEMBLY (Fuser) (4) WASTE TONER BOX
(2) OIL ROLL ASSEMBLY
(Fuser Oil Roll)
(3) DRUM CARTRIDGE
(Photoconductor Unit)
Figure 3-4. Interior view of the printer

3.2.2 Removing/Replacing the Consumables

The consumables available (can be replaced by users) for this printer
are as shown below. Refer to Section 6-3 in Chapter 6 for the
procedures.
n TONER CARTRIDGE
n OIL ROLL ASSEMBLY
n DRUM CARTRIDGE (including WASTE TONER BOX)
n WASTE TONER BOX
Chapter 3 Disassembly and Assembly/Adjustment
(3)
(4)
(5)
(Waste Toner Collector)
(5) TONER CARTRIDGE
(Toner Cartridge)

3.2.3 Updating the Program ROM

The program ROM of this printer is a flash ROM module and can be
updated in one of the following 2 ways:
1. Transferring the ROM updating program data (*.RCC) from the host
computer via the standard parallel interface.
2. Copying the program ROM from the flash ROM module which has
the most updated program.
Also, when you failed to write the program into the flash ROM and
perform the same writing operation again or when you copy the
program from the flash ROM module to another flash ROM module. you
need to perform:
3. Formatting Flash ROM module
See the following sections for the procedures of each operation.
Revision B
3-5