Installing Rack Nuts - HP D7171A - NetServer - LPr Installation Manual

Chapter 13

Installing Rack Nuts

Rack nuts are installed on the front columns to secure the bezel latch and hinge.
Use the rack template to locate the mounting holes.
10. Install the bezel latch rack nuts on the right front column (holes 11 and 15
counted up from the baseline).
11. Install the bezel hinge rack nuts on the left front column (holes 6 and 19
counted up from the baseline).
Baseline
148
Template
Install rack
nuts at holes
6 and 19 up
from baseline.
Front
Figure 13-3. Installing Rack Nuts
Alternative Rack Mounting
Install rack
nuts 11 and
15 holes up
from baseline