HP D7171A - NetServer - LPr Installation Manual page 95

Chapter 8 Installing the HP NetServer in the HP Rack System/E or Rack System/U
Use HP Rack Assistant to plan the rack configuration and to check
power, weight, and stability of the configured rack. Download HP
Rack Assistant from:
http://netserver.hp.com/netserver/support/
Leveler
Feet
Figure 8-2. Anti-tip Foot and Leveler Feet
l
Install components such as DIMMs and processors into the system board
assembly before rack-mounting the NetServer.
l
Remove power supplies and hard drives before lifting the HP NetServer.
Always keep the following safety and environmental issues in mind, especially if
you install the HP NetServer in a non-HP rack environment:
Maximum Recommended Ambient Temperature - The maximum
recommended ambient temperature of the room is 35 C (95 F).
Elevated Operating Ambient Temperature - The ambient operating
temperature within a closed or multi-unit rack assembly may exceed the
room's ambient temperature. Ensure the temperature within the rack itself
does not exceed 35 C (95 F).
Anti-tip
Foot
87