HP D7171A - NetServer - LPr Installation Manual page 105

Chapter 8 Installing the HP NetServer in the HP Rack System/E or Rack System/U
7. Reset the HP NetServer handles on the slides and then line up the
mounting holes in the HP NetServer chassis with the screw holes in the
slides (see Figure 8-11).
Figure 8-11. Securing the HP NetServer to the Slides
8. Insert three screws through each slide member into the HP NetServer.
Tighten all screws securely.
9. Remove the two screws from each handle and remove.
WARNING
Save the handles and screws for future removal and reshipping
of the NetServer.
97