HP D7171A - NetServer - LPr Installation Manual page 31

Chapter 2
Green (Power) LED
Amber (Attention) LED
Figure 2-8. Light Pipes Display PCI LEDs
Table 2-4. PCI Hot Plug LEDs
Amber Green
Off
On
On
On
Off
On
Off Off
For more information on PCI Hot Plug boards, see Chapter 6, "Installing
Additional PCI Boards," and Information Assistant on the HP NetServer Online
Documentation CD-ROM.
Power Supply LEDs
Interpret the green LEDs on the power supplies in this way:
Table 2-5. Power Supply LEDs
Green LED
Steady Green
Flashing
Off
Status Indicated
Power to the slot is on, and
the slot is operating normally.
The slot needs attention, but
power to the slot is on.
The slot needs attention, and
power to the slot is off.
Power to the slot is off.
Indicates this NetServer Status:
The system is powered up.
The system is in stand-by or power-save mode.
The AC line is unplugged or the power supply
has failed (see Chapter 12, "Troubleshooting").
Controls, Ports, and Indicators
Onboard LEDs
Your Action
Do not remove the
board from the slot.
Do not remove the
board from the slot.
You can safely remove
the board from this slot.
You can safely remove
the board from this slot.
23