Installing Round-Hole Rack Cage Nuts; Installing The Mounting Bracket Slide Assembly In Round-Hole Racks - HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual

Overview of Server Installation

Installing Round-Hole Rack Cage Nuts

The round-hole rack cage nuts can be installed without special tools. Make sure to
install two cage nuts at the front of the rack at the locations marked in the section
"Marking with the Template."
NOTE: The cage nuts are included in the hardware kit supplied with the rack.
Figure 2-13: Installing round-hole rack cage nuts
Installing the Mounting Bracket Slide Assembly in Round-Hole
Racks
The mounting bracket slide assemblies are labeled with the correct positioning in the
rack. The labels will read "Front – Left," "Back – Left," "Front – Right," and
"Back – Right."
To install the mounting bracket slide assembly:
1. Select the appropriate slide assembly, matching the position label on the slide
with the side being installed.
2-22 HP ProLiant ML350 Generation 3 Server Setup and Installation Guide