Installing Bezel Rack Nuts - HP D7171A - NetServer - LPr Installation Manual

Chapter 8 Installing the HP NetServer in the HP Rack System/E or Rack System/U

Installing Bezel Rack Nuts

Facing the front of the rack:
1. Install the bezel-latch rack nuts on the right front column (holes 11 and 15
up from the baseline).
2. Install the bezel-hinge rack nuts on the left front column (holes 6 and 19 up
from the baseline).
Install the bezel hinge
rack nuts at the
6th and 19th holes
up from the baseline
(front left column).
Figure 8-4. Marking the Columns for Rack Nuts
90
Install the bezel latch
rack nuts at the
11th and 15th holes
up from the baseline
(front right column).
Template
Top is 8
EIA units from
the baseline.
Baseline
Front