Installing From The Cd-Rom - HP D7171A - NetServer - LPr Installation Manual

Chapter 11

Installing from the CD-ROM

To install Information Assistant onto a Windows PC from the HP NetServer
Online Documentation CD-ROM, perform these steps:
1. Turn on your computer.
2. Insert the HP NetServer Online Documentation CD-ROM into the
CD-ROM drive.
3. If you have the Autorun feature enabled, the CD-ROM starts
automatically.
4. If you have Autorun disabled, at the command prompt, type the following:
drive : \infoasst\setup
where drive is the letter of the CD-ROM drive.
5. Follow the instructions that appear on your screen.
The Setup utility creates a new program group called NetServer Information
Assistant, with an icon for running the application.
134
Information Assistant