Follow the instructions on the screen and in the network operating
system's installation instructions to perform the manual NOS
For Manual NOS Installation Only: Before you perform a manual NOS
installation, print out instructions and create NOS-specific driver
diskette(s), as follows:
a. Create Drivers Diskette: Select Create Drivers Diskette(s) to create
one or more customized diskettes containing HP drivers and
configuration files to use when you install the NOS.
b. Print and Read Instructions: On the Show NOS Installation
Instructions screen, select "Save to Disk" to copy the NOS
installation instructions to disk. Then print them from disk. Read
the instructions first, and then follow them to manually install the
a. Automated NOS Installation: For certain versions of Novell
NetWare / IntranetWare or Microsoft Windows NT Server,
Configuration Assistant formats and partitions the hard disk drive.
Installation Assistant then guides you through the NOS installation
and configures the NOS with the appropriate drivers for the
HP-bundled configuration or for network interface cards on HP's
Tested Products List.
b. Manual NOS Installation: Follow the instructions on the screen and
the network operating system installation instructions that you
15. Install HP TopTools: Refer to the HP NetServer Server Management
Reference Guide and install HP TopTools.
16. Refer to Information Assistant on the HP NetServer Online Documentation
CD-ROM for further information about your HP NetServer. See Chapter
11, "Information Assistant," for information.
17. Test and troubleshoot as necessary.
Refer to Chapter 12, "Troubleshooting."
Your LH 3000r or LH 3000 installation is complete.
Setting Up the HP NetServer LH 3000r and LH 3000