Tools Required; Installing The Processor - HP D7171A - NetServer - LPr Installation Manual

Chapter 7
CAUTION Do not change the processor speed switches as this can result
in unreliable or intermittent performance, and data integrity
may also be at risk.
l
Use only processor upgrade kits with the same HP product number. This
ensures the processor type, clock speed, and cache size match, and that
processor steppings are compatible.
l
Be sure that the VRM and the processor module associated with it are both
in either the primary or the secondary pair of slots.

Tools Required

Torx 15 driver
l
Torx 25 driver
An anti-static service kit (3M 8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap

Installing the Processor

CAUTION
Use an anti-static wrist strap and a grounding mat.
Wear a wrist-strap and use a static-dissipating work surface
connected to the chassis when handling components. Ensure
the metal of the wrist strap contacts your skin.
The installation procedure is the same for the rack-mounted as for the pedestal HP
NetServer once you gain access to the system board assembly.
1. Unpack the processor shipping box and check the contents against its
packing list.
CAUTION
Do not remove the processor from its bag until you are ready
to install it. Make sure the bag remains sealed.
72
Installing Additional Processors