HP D7171A - NetServer - LPr Installation Manual page 45

Chapter 3
3. Once you have removed the bezel, remove Cover 1 by loosening the
thumbscrew and then pulling the cover forward to disengage it. Lift it
outward and away from the chassis (see Figure 3-9).
4. Remove Cover 2 by loosening the thumbscrew, pulling the cover forward
and then slightly sideways to disengage it. Lift it up and away from the
chassis.
5. Remove the right cover (Cover 3) by loosening the thumbscrew and
pulling the cover forward to disengage it. Lift it outward and away from
the chassis.
Thumbscrew
Figure 3-9. HP NetServer LH 3000 Covers
Opening and Closing the HP NetServer
Cover 2
Thumbscrew
Thumbscrew
Cover 3
37