Figure 7-11. Install the System Board Assembly
Do not operate the HP NetServer without first installing all
covers and the front bezel. Operating the system without all
covers in place reduces critical cooling airflow over some
components, such as hard disk drives and processors.
Operating the system without all covers in place may result in
failure of these components.
23. Replace the covers and bezel on the chassis (see Chapter 3, "Opening and
Closing the NetServer").
24. Reconnect the power cords and cables.
25. Return the NetServer to normal operation.
HP recommends using the HP NetServer Navigator CD-ROM
that comes with the processor upgrade kit to ensure you have
the latest drivers and information.
Installing Additional Processors