Table of Contents
Advertisement
Configuration Using the Command Line Interface (CLI)
Warnings (CLI)
The ES7506 provides several types of warning features for you to remotely monitor the status of the attached
devices or changes in your network. The features include Fault Relay, System Log and SMTP Email Alert.
Optionally, you can use the web user interface for configuration, see
This table provides detailed information about the command lines of the warning configuration.
Fault Relay Output
Dry Output
Ping Failure
Port Link Failure
Power Failure
Super Ring Failure
Disable Relay
Display
136 - Warnings (CLI)
Switch(config)# relay 1 dry
<0-4294967295> turn on period in second
Switch(config)# relay 1 dry 5
<0-4294967295> turn off period in second
Switch(config)# relay 1 dry 5 5
Switch(config)# relay 1 ping 192.168.250.33
<cr>
reset
reset a device
Switch(config)# relay 1 ping 192.168.250.33 reset
<1-65535>
reset time
Switch(config)# relay 1 ping 192.168.250.33 reset 60
<0-65535>
hold time to retry
Switch(config)# relay 1 ping 192.168.250.33 reset 60 60
Switch(config)# relay 1 port
PORTLIST
port list
Switch(config)# relay 1 port fa1-5
Switch(config)# relay 1 power
<1-2>
power id
Switch(config)# relay 1 power 1
Switch(config)# relay 1 power 2
Switch(config)# relay 1 ring
Switch(config)# no relay
<1-2>
relay id
Switch(config)# no relay 1 (Relay_ID: 1 or 2)
<cr>
Switch# show relay 1
Relay Output Type : Port Link
Port : 1, 2, 3, 4
Switch# show relay 2
Relay Output Type : Super Ring
Warning
on Page 81.
RocketLinx ES7506 User Guide: 2000529 Rev. F
Advertisement
Table of Contents
