Send Firmware Complete Message - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Figure 49: Send Firmware Complete message
9. Click Close to close the dialog box.
10. Click Close to close the Firmware Library dialog box and return to the
Edge Switch 2/24 Service Manual
This message remains as the progress bar continues to travel across the dialog
box. The bar progresses to 100% when the last file is transmitted to the CTP
card. The switch then performs an IPL, during which the switch-to-HAFM
server link drops momentarily and the following occur at the Product
Manager application:
— As the network connection drops, the Status table turns yellow, the
Status field displays No Link, and the State field displays a reason
message.
— The alert panel at the bottom of the navigation control panel displays a
grey square, indicating switch status is unknown.
— Illustrated FRUs in the Hardware View disappear, and appear again as
the connection is re-established.
After the IPL, a Send firmware complete message displays as shown
below.
Hardware View.
Repair Information
165