Configure Zone Sets; Zoning Page-Zone Set Tab - HP StorageWorks Edge Switch 2/12 Installation Manual

Configure Zone Sets

To configure zone sets at the EWS interface:
1. Click Zoning to display the Zone Set tab
Figure 28: Zoning page—Zone Set tab
2. To create a zone set that incorporates zones and zone members (configured
3. Click Save and Activate Zoning Configuration. After the zone set name is
4. Click Save and Activate Zoning Configuration to save and activate the new
Edge Switch 2/12 Installation Guide
under "Configure Zones" on page 67), type a new zone set name in the Zone
Set Name field.
validated, a confirmation dialog box displays.
zone set. The message "Your Configuration changes have been
successfully activated" displays. Note the following:
— Rename zone set - To rename a zone set, type the new name in the Zone
Set Name field. Click Rename Zone Set. The new zone set name is
validated and changed.
Installing and Configuring the Edge Switch 2/12
(Figure 28).
71