Appendix A: Technical Reference; 750-W Single Power Supply Input Voltages; 750-W Single Power Supply Output Voltages; Table 5. Power Supply Output Capability - Intel SR2600UR - Server System - 0 MB RAM Service Manual

Appendix A:

750-W Single Power Supply Input Voltages

The power supply must operate within all specified limits over the input voltage range
shown in the following table.
Parameter Minimum
Voltage 90 V
rms
(110)
Voltage 180 V
rms
(220)
Frequency 47 Hz
Notes:
1. Maximum input current at low input voltage range is measured at 90 VAC, at
maximum load.
2. Maximum input current at high input voltage range is measured at 180 VAC, at
maximum load.
3. This is not to be used for determining agency input current markings.
4. Maximum rated input current is measured at 100 VAC and 200 VAC.

750-W Single Power Supply Output Voltages

The following table lists the total wattage available from the power subsystem for each
voltage. Ensure that your loads do not exceed the combined total wattage of 750 Watts
+3.3 V
+5.0 V
+12.0 V1
+12.0 V2
®
Intel Server System SR2600UR/SR2625UR Service Guide
Technical Reference
Rated Maximum
100-127 140 V
rms
V
rms
200-240 264 V
rms
V
rms
50/60 Hz 63 Hz

Table 5. Power Supply Output Capability

Voltage Minimum OCP Limits
110% (= 26.4 A)
110% (= 33 A)
26.0 A
26.0 A
Power-off
Startup VAC
VAC
85 VAC +/- 75 VAC +/-
4 VAC 5 VAC
Maximum OCP Limits
150% (= 36 A)
150% (= 45 A)
32 A max
32 A max
Maximum Maximum
Input AC Rated Input
Current AC Current
1,3
12 A 11.0 A
rms rms
2,3
6.0 A 5.5 A
rms rms
4
4
147