Figure 81. Removing The Filler Panel; Figure 82. Attaching The 2.5 Inch Hdds To The Drive Cage - Intel SR2600UR - Server System - 0 MB RAM Service Manual

1. Remove the default filler panel from the server system by pressing the blue release
lever (see letter "A" in
sliding it out from the front of the system (see letter "B" in
2. Insert each 2.5 inch hard disk drive into the drive cage (see letter "A" in
and atach using four screws (see letter "B" in
®
Intel Server System SR2600UR/SR2625UR Service Guide
Figure 81) and pushing it forward to release it and then
A
B

Figure 81. Removing the Filler Panel

Figure 82. Attaching the 2.5 inch HDDs to the drive cage

Figure 81).
Figure 82).
A
B
AF003035
AF003029
Figure 82)
91