Removing The Raid Activation Key And The Raid Mini-Dimm; Figure 105. Installing The Raid Activation Key And The Raid Mini-Dimm - Intel SR2600UR - Server System - 0 MB RAM Service Manual

2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove the large air baffle. For instructions, see
on page
4. Install the RAID activation key by pushing straight down into the RAID key socket
(see letter "A" in
5. Install the RAID mini-DIMM as follows:
a. Open both socket levers (see letter "B" in
b. Insert the DIMM into the socket (see letter "C" in
c. Push firmly on the DIMM until it snaps into place and both levers close.
6. Install the large air baffle. For instructions, see
page
7. Install the processor air duct. For instructions, see
Duct" on page
8. Install the PCI riser assembly. For instructions, see
Assembly" on page

Removing the RAID Activation Key and the RAID Mini-DIMM

To remove the RAID activation key and RAID Mini-DIMM, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
112
56.
70.
Figure
connector edge of the DIMM aligns correctly with the slot.
Open Levers
C
B

Figure 105. Installing the RAID Activation Key and the RAID Mini-DIMM

70.
57.
51.
50.
105).
Figure
RAID Mini DIMM
Socket
B
"Installing the Large Air Baffle" on
®
Intel Server System SR2600UR/SR2625UR Service Guide
"Removing the Processor Air
"Removing the Large Air Baffle"
105)
Figure 105) making sure the
RAID
Key
®
Intel RAID
Activation
Key Socket
A
AF002976
"Installing the Processor Air
"Installing the PCI Riser
"Removing the PCI Riser