SAS/SATA Midplanes
The midplane serves as the primary interface between the server board, hot-swap
backplane, and control panel. Two midplanes are offered for this system:
•
Passive SATA/SAS midplane (data cables required)
•
Active SAS/SATA RAID midplane (no data cables required)
Passive Midplane
The following diagram show the location for each connector found on the passive
midplane.
A.
Midplane Power Connector
B.
Fan 6 Power Connector
C.
Fan 5 Power Connector
D.
SATA 0-7 Connectors
E.
Bridge Board Connector
Note: SATA connectors 6 and 7 are not used in the Intel
32
C
B
D
A
J
Figure 17. Passive Midplane Components
®
Intel
Server System SR2600UR/SR2625UR Service Guide
E
F
G
H
I
F.
Fan 4 Power Connector
G.
Fan 3 Power Connector
H.
Fan 1 Power Connector
I.
Fan 2 Power Connector
J.
Backplane Connectors
®
Server System SR2600UR/SR2625UR.
AF000047