Installing A Pci Riser Card; Figure 35. Installing Pci Riser Card Into The Server System - Intel SR2600UR - Server System - 0 MB RAM Service Manual

7. Install the PCI add-in card(s), if desired. For instructions, see
Add-in Card" on page
8. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
9. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.

Installing a PCI Riser Card

To install a PCI riser card, follow these steps:
1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see
Assembly" on page
3. Remove any add-in cards from the PCI riser card. For instructions, see
a PCI Add-in Card" on page
4. Press and hold the blue riser locking lever in that position (see letter "A" in
Figure
5. Place the riser card onto the retention pins (see letter "B" in
6. Slide the riser card in the direction shown to lock it into place (see letter "C" in
Figure
7. Release the blue locking lever.
8. Install the PCI add-in card(s), if desired. For instructions, see
Add-in Card" on page
9. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
®
Intel Server System SR2600UR/SR2625UR Service Guide
54.
50.
55.
35).
35).
Riser Retention Pin
C
B

Figure 35. Installing PCI Riser Card into the Server System

54.
51.
"Removing the PCI Riser
Figure
A
d
r C a r
R i s e
AF003013
51.
"Installing a PCI
"Removing
35).
"Installing a PCI
53