Figure 109. Removing The Server Board - Intel SR2600UR - Server System - 0 MB RAM Service Manual

7. Remove the Intel
RMM3" on page
8. Disconnect all cables from the server board.
9. Remove memory. For instructions, see
10. Remove the processor heatsink(s) and processor(s). For instructions, see
"Removing the Heatsink" on page
11. Remove the nine screws from the server board (see letter "A" in
lift the server board from the server system (see letter "B" in
12. Install the replacement server board. For instructions, see
Board" on page
®
Intel Server System SR2600UR/SR2625UR Service Guide
®
RMM3, if installed. For instructions, see
101.
64.
A
B

Figure 109. Removing the Server Board

118.
"Removing the Intel
"Removing DIMMs" on page
Figure
"Installing the Server
®
59.
Figure 109) and
109).
AF002980
117