Intel SR2600UR - Server System - 0 MB RAM Service Manual page 23

•
Passive midplane, installed in the server system
•
Hot-swap SAS/SATA backplane, installed in the server system
•
Non-redundant fan module, installed in the server system
•
Bridge board, installed in the server system
•
Processor air duct, installed in the server system
•
Two processor heatsinks, installed in the server system
•
Seven DIMM blanks, installed in the server system
•
Five 3.5-inch hot-swap drive trays and drive filler blanks, installed in the server
system (SR2600URBRP only)
•
Six 2.5-inch hot-swap drive trays and drive filler blanks, installed in the server
system (SR2625URBRP only)
•
A filler panel (for drive locations 6 and 7), installed in the server system
(SR2625URBRP only)
•
Flex bay filler panel, installed in the server system
•
Three air baffles (including a large air baffle, fan baffle, and small air baffle),
installed in the server system (SR2600URBRP only)
•
Two air baffles (including a large air baffle and a fan baffle), installed in the server
system (SR2625URBRP only)
•
A box of hardware components (referred to herein as the "hardware box")
•
Slimline peripheral bay filler panel, in the hardware box
•
Optical drive tray assembly, in the hardware box
•
One 32-6mm flat screw for installing the optical drive component, in the hardware
box (SR2600URBRP only)
•
Two screws for installing the optical drive component, in the hardware box
(SR2625URBRP only)
•
Rack handles, in the hardware box
•
Attention document, in the server system product box
•
Quick Start User's Guide, in the server system product box
•
Intel
•
Intel
®
Intel Server System SR2600UR/SR2625UR Service Guide
®
Server Deployment Toolkit 3.0 CD
®
System Management Software DVD
3