Removing The Raid Battery Backup Unit; Figure 107. Installing The Raid Battery Backup Unit - Intel SR2600UR - Server System - 0 MB RAM Service Manual

8. Install the large air baffle. For instructions, see
page
9. Install the processor air duct. For instructions, see
Duct" on page
10. Install the PCI riser assembly. For instructions, see
Assembly" on page

Removing the RAID Battery Backup Unit

To remove the RAID battery backup unit, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove the large air baffle. For instructions, see
on page
4. Remove the cable from the rear of the RAID battery backup unit and the midplane
board (see letter "A" in
5. Slide the RAID battery backup unit away from the power supply and lift from the
server system (see letter "B" in
®
Intel Server System SR2600UR/SR2625UR Service Guide
A
B

Figure 107. Installing the RAID Battery Backup Unit

70.
57.
51.
50.
56.
70.
Figure
Chassis
Tab(2)
"Installing the Large Air Baffle" on
"Installing the Processor Air
"Installing the PCI Riser
"Removing the PCI Riser
"Removing the Processor Air
"Removing the Large Air Baffle"
108).
Figure 108).
C
D
Midplane RAID
BBU Connector
AF002978
115