5. Install the Intel
6. Install the processor air duct. For instructions, see
Duct" on page
7. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
Replacing the Midplane Board
The following sections describe how to replace the midplane board.
Removing the Midplane Board
To remove the midplane board, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Disconnect all cables from the midplane board.
4. Remove the fan baffle. For instructions, see
5. Remove the bridge board as follows:
102
®
RMM3 filler panel into the system back panel (see
Figure 95. Installing the Intel
57.
50.
56.
®
Intel
Server System SR2600UR/SR2625UR Service Guide
®
RMM3 filler panel
"Installing the Processor Air
51.
"Removing the PCI Riser
"Removing the Processor Air
"Removing the Fan Baffle" on page
Figure
95).
AF003011
67.