Removing And Installing The Fan Baffle; Removing The Fan Baffle; Figure 50. Installing The Small Air Baffle - Intel SR2600UR - Server System - 0 MB RAM Service Manual

Removing and Installing the Fan Baffle

Some installation processes require that you remove the fan baffle that is placed between
fans 3 and 5 and the backplane, near the front of your server. The following sections
describe how to remove and then install the fan baffle. Use the instructions in these
sections only when it is indicated as necessary for a component installation process.
Always operate your server system with the fan baffle in place. The fan baffle is required
for proper airflow within the server system.

Removing the Fan Baffle

To remove the fan baffle, follow these steps:
1. Remove the hook (on the front of the baffle) from the hole in the backplane board
(see letter "A" in
2. Slide the baffle out in the direction shown (see letter "B" in
3. Pull up on it (see letter "C" in
®
Intel Server System SR2600UR/SR2625UR Service Guide

Figure 50. Installing the Small Air Baffle

Figure 51 - the arrow is pointing to the hook in the baffle).
Figure 51).
AF002959
Figure 51).
67