Replacing A Fixed Fan Module - Intel SR2600UR - Server System - 0 MB RAM Service Manual

14. Install the PCI riser assembly. For instructions, see
Assembly" on page

Replacing a Fixed Fan Module

To replace a fixed fan module, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove the large air baffle. For instructions, see
on page
4. Remove the fan baffle. For instructions, see
5. Remove the bridge board. For instructions, see step 5 in
Board" on page
6. Disconnect the fan cables from the midplane.
130
51.
50.
56.
70.
102.
Intel
"Installing the PCI Riser
"Removing the PCI Riser
"Removing the Processor Air
"Removing the Large Air Baffle"
"Removing the Fan Baffle" on page
®
Server System SR2600UR/SR2625UR Service Guide
"Removing the Midplane
67.