Removing And Installing The Small Air Baffle; Installing The Small Air Baffle; Server System Sr2600Ur Only); Figure 49. Removing The Small Air Baffle - Intel SR2600UR - Server System - 0 MB RAM Service Manual

Removing and Installing the Small Air Baffle (Intel

Server System SR2600UR only)

Some installation processes require that you remove the small air baffle that is placed
behind the hard drive bays, near the front of your server. The following sections describe
how to remove and then install the small air baffle. Use the instructions in these sections
only when it is indicated as necessary for a component installation process.
Always operate your server system with the small air baffle in place. The small air baffle
is required for proper airflow within the server system.
Removing the Small Air Baffle
Pull out and up on the air baffle as shown in

Installing the Small Air Baffle

To install the small air baffle, follows these steps:
1. Lower the baffle into the server system and position the baffle over the two standoff
locations.
2. Snap the baffle into place as shown in
66
Figure 49

Figure 49. Removing the Small Air Baffle

Figure
®
Intel Server System SR2600UR/SR2625UR Service Guide
to remove it.
50.
®
AF002958