Installing the Front Bezel
The front bezel is optional. If your system includes the bezel for either the standard
control panel or Intel
Note: Before installing the bezel, you must install the rack handles. For instructions, see
"Installing the Rack Handles" on page
To install the bezel, follow these steps:
1. At each end of the bezel, line up the center notch on the bezel with the center guide
on the rack handles.
2. Push the bezel onto the front of the server system until it clicks into place.
®
Intel
Server System SR2600UR/SR2625UR Service Guide
®
Local Control Panel, follow these steps to install the front bezel.
136.
Figure 29. Installing the Front Bezel
TP02130
47