Installing The Pci Riser Assembly; Installing And Removing A Pci Add-In Card; Installing A Pci Add-In Card; Figure 43. Installing Pci Riser Assembly - Intel R1000EP Series Service Manual

Server System Features
Do one of the following:
 If you need to add or replace a PCI add-in card, see "Installing and Removing a
 If you need to add or replace a PCI riser card, see "Replacing a PCI Riser Card".
 If you removed the PCI riser assembly for another procedure, continue with that

Installing the PCI Riser Assembly

1. Position the riser card edge connector over the server board riser socket and align the two
hooks on the back edge of the riser assembly with the slots on the back of the chassis, then
press straight down into riser socket.
2. Connect any cables to add-in cards that require them. See your add-in card documentation for
information and add-in card requirements.

Installing and Removing a PCI Add-in Card

Installing a PCI Add-in Card

1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly".
2. Remove the filler panel from the add-in card slot and remove the screw as shown (see letter A).
3. Insert add-in card until it seats in the riser connector (see letter B).
4. Secure add-in card with screw as shown (see letter C).
28
PCI Add-in Card".
procedure.

Figure 43. Installing PCI Riser Assembly

®
Intel Server System R1000EP Service Guide