Entering Cli Commands - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
Table 2-6. CLI Mode Access and Exit (continued)
Command Mode
Class-Map
Config
MAC Access-list
Config
DHCP Pool
Config

2.2.6 Entering CLI Commands

The 7200R Series Managed Switch supports several features to help you enter commands.
2.2.6.1 Command Completion and Abbreviation
Command completion finishes spelling the command when you type enough letters of a
command to uniquely identify the command keyword. Once you have entered enough
letters, press the SPACEBAR or TAB key to complete the word.
Command abbreviation allows you to execute a command when you type enough letters of
a command to uniquely identify the command. You must enter all of the required
keywords and parameters before you enter the command.
2.2.6.2 CLI Error Messages
If you enter a command and the system is unable to execute it, an error message appears.
Table 2-7 describes the most common CLI error messages.
Table 2-7. CLI Error Messages
Message Text
% Invalid input detected at '^'
marker.
Command not found / Incomplete
command. Use ? to list commands.
Ambiguous command
2-8
Access Method
From the Global Config mode, enter
class-map.
From the Global Config mode enter
mac access-list extended
<name>.
From the Global Config mode, enter
ip dhcp pool <name>.
v1.0, November 2007
Exit or Access Previous Mode
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
Description
Indicates that you entered an incorrect or
unavailable command. The carat (^) shows
where the invalid text is detected. This message
also appears if any of the parameters or values
are not recognized.
Indicates that you did not enter the required
keywords or values.
Indicates that you did not enter enough letters to
uniquely identify the command.
Overview