Sshcon Timeout; Show Ip Ssh - NETGEAR ProSAFE M7100-24X Reference Manual

ProSAFE M7100 Managed Switches

sshcon timeout

Use this command to set the SSH connection session timeout value, in minutes. A session is active
as long as the session has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
Default 5
Format
sshcon timeout <1-160>
Mode Privileged EXEC
no sshcon timeout
Use this command to set the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
Format
no sshcon timeout
Mode Privileged EXEC

show ip ssh

Use this command to display the ssh settings.
Format
show ip ssh
Mode Privileged EXEC
Term Definition
Administrative This field indicates whether the administrative mode of SSH is enabled or disabled.
Mode
Protocol Level The protocol level might have the values of version 1, version 2 or both versions 1 and
version 2.
SSH Sessions The number of SSH sessions currently active.
Currently Active
Max SSH Sessions The maximum number of SSH sessions allowed.
Allowed
SSH Timeout The SSH timeout value in minutes.
Keys Present Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation in Indicates whether RSA or DSA key files generation is currently in progress.
Progress
Management Commands
508