View The Ipv6 Network Neighbor - NETGEAR MS510TX User Manual

10. In the IPv6 Gateway field, specify the default gateway for the IPv6 network interface.
The gateway address is in IPv6 global or link-local address format.
11. To configure one or more static IPv6 addresses for the management interface, do the
following:
a. In the IPv6 Prefix/Prefix Length field, specify the static IPv6 prefix and prefix to the
IPv6 network interface.
The address is in the global address format.
b. In the EUI64 menu, select True to enable the Extended Universal Identifier (EUI)
flag for IPv6 address, or select False to omit the EUI flag.
c. Click the Add button.
12. Click the Apply button.
Your settings are saved.

View the IPv6 Network Neighbor

Use the IPv6 Network Neighbor page to view information about the IPv6 neighbors that the
switch discovers through the network interface by using the Neighbor Discovery Protocol
(NDP).

To view the IPv6 neighbor table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > IPv6 Network Neighbor.
The IPv6 Network Interface Neighbor Table page displays.
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information
Access the Switch
31
on page 12.