Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
•
Commands under the interface range context are executed independently on each interface
in the range.
Example
The following example groups port-channels 1, 2 and 6 to receive the same command.
Console(config)# interface range port-channel 1-2,6
channel-group
The channel-group Interface Configuration (Ethernet) mode command associates a port with a
port-channel. To remove a port from a port-channel, use the no form of this command.
Syntax
channel-group port-channel-number mode {on | auto}
no channel-group
•
port-channel_number — Specifies the number of the valid port-channel for the current
port to join.
•
on — Forces the port to join a channel without an LACP operation.
•
auto — Allows the port to join a channel as a result of an LACP operation.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
236
Port Channel Commands