Arp - Dell PowerConnect 3424 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example the displays the configured IP interfaces and their types.
Console# show ip interface
Gateway IP Address
------------------
10.7.1.1
IP address
-------------
10.7.1.192/24
10.7.2.192/24

arp

The arp Global Configuration mode command adds a permanent entry in the Address Resolution
Protocol (ARP) cache. To remove an entry from the ARP cache, use the no form of this command.
Syntax
arp ip_addr hw_addr {ethernet interface-number | vlan vlan-id | port-channel port-channel
number.}
no arp ip_addr {ethernet interface-number | vlan vlan-id | port-channel port-channel number.}
• ip_addr — Valid IP address or IP alias to map to the specified MAC address.
• hw_addr — Valid MAC address to map to the specified IP address or IP alias.
• interface-number — Valid Ethernet port.
• vlan-id — Valid VLAN number.
• port-channel number. — Valid Port-channel number.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
192
IP Addressing Commands
Type
------
Static
Interface
---------
VLAN 1
VLAN 2
Activity status
---------------
Active
Type
-------
Static
DHCP