Show Rmon Alarm-Table - Dell PowerConnect 3424 Cli Reference Manual

Example
The following example configures the following alarm conditions:
• Alarm index — 1000
• Variable identifier — dell
• Sample interval — 360000 seconds
• Rising threshold — 1000000
• Falling threshold — 1000000
• Rising threshold event index — 10
• Falling threshold event index — 20
Console(config)# rmon alarm 1000 dell 360000 1000000 1000000 10 20

show rmon alarm-table

The show rmon alarm-table User EXEC mode command displays the alarms table.
Syntax
show rmon alarm-table
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the alarms table.
Console> show rmon alarm-table
Index OID
----- ----------------------
1 1.3.6.1.2.1.2.2.1.10.1
2 1.3.6.1.2.1.2.2.1.10.1
3 1.3.6.1.2.1.2.2.1.10.9
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Owner
--------------
CLI
Manager
CLI
RMON Commands
273