show vlan internal usage
The show vlan internal usage Privileged EXEC mode command displays a list of VLANs used
internally by the device.
Syntax
show vlan internal usage
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays VLANs used internally by the device.
Console# show vlan internal usage
VLAN
Usage
----
---------
1007
Eth 1/e21
1008
Eth 1/e22
1009
Eth 1/e23
show interfaces switchport
The show interfaces switchport Privileged EXEC mode command displays the switchport
configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel port-channel-number}
•
interface — A valid Ethernet port number.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
IP address
Reserved
----------
--------
Active
No
Inactive
Yes
Active
Yes
419
VLAN Commands