Console> show stack 1
Unit 1:
MAC address: 00:00:b0:87:12:11
Master: Forced.
Product: PowerCOnnect34xx. Software: 1.0.0.0
Status: Master
Active image: image-1.
Selected for next boot: image-2.
show users
The show users User EXEC mode command displays information about the active users.
Syntax
show users
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active users.
Console> show users
Username
----------
Bob
John
Robert
Betty
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
378
System Management
Protocol
Location
-----------
------------
Serial
SSH
172.16.0.1
HTTP
172.16.0.8
Telnet
172.16.1.7