Configuration And Image Files; Copy - Dell PowerConnect 3424 Cli Reference Manual

Configuration and Image Files

copy

The copy Privileged EXEC mode command copies files from a source to a destination.
Syntax
copy source-url destination-url
• source-url — The source file location URL or reserved keyword of the source file to be
copied. (Range: 1-160 characters)
destination-url — The destination file URL or reserved keyword of the destination file.
•
(Range: 1-160 characters)
The following table displays keywords and URL prefixes:
Keyword Source or Destination
flash: Source or destination URL for flash memory. It is the default in case a URL is
specified without a prefix.
running-config Represents the current running configuration file.
startup-config Represents the startup configuration file.
image If the source file, represents the active image file. If the destination file,
represents the non-active image file.
boot Boot file.
tftp:// Source or destination URL for a TFTP network server. The syntax for this alias is
tftp://host/[directory]/filename. The host can be represented by its IP address or
hostname.
xmodem: Source for the file from a serial connection that uses the Xmodem protocol.
unit://member/ Image file on one of the units. To copy from the master to all units, specify * in
image the member field.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Configuration and Image Files
135