Example
The following example configures the power usage threshold for which alarms are sent to 80%.
Console(config)# power inline usage-threshold 80
power inline traps enable
The power inline traps enable Global Configuration mode command enables inline power
traps. To disable inline power traps, use the no form of this command.
Syntax
power inline traps enable
no power inline traps
Default Configuration
Inline power traps are disabled
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables inline power traps to be sent when a power usage threshold is
exceeded.
Console(config)# power inline traps enable
show power inline
The show power inline User EXEC mode command displays the information about inline
power.
Syntax
show power inline [ethernet interface]
•
interface — Valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
246
Power over Ethernet Commands