Snmp-Server Group - Dell PowerConnect 3424 Cli Reference Manual

Command line interface (cli) guide (.htm)
Hide thumbs Also See for PowerConnect 3424:
Table of Contents

Advertisement

Examples
The following example creates a view that includes all objects in the MIB-II system group except
for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group.
Console(config)# snmp-server view user-view system included
Console(config)# snmp-server view user-view system.7 excluded
Console(config)# snmp-server view user-view ifEntry.*.1 included

snmp-server group

The snmp-server group Global Configuration mode command configures a new Simple
Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views. To
remove a specified SNMP group, use the no form of this command.
Syntax
snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview ] }
[read readview] [write writeview]
no snmp-server group groupname {v1 | v2 | v3 [noauth | auth | priv]}
groupname—Specifies the name of the group.
v1—Indicates the SNMP Version 1 security model.
v2—Indicates the SNMP Version 2 security model.
v3—Indicates the SNMP Version 3 security model.
noauth—Indicates no authentication of a packet. Applicable only to the SNMP Version 3
security model.
auth—Indicates authentication of a packet without encrypting it. Applicable only to the
SNMP Version 3 security model.
priv—Indicates authentication of a packet with encryption. Applicable only to the SNMP
Version 3 security model.
readview—Specifies a string that is the name of the view that enables only viewing the
contents of the agent. If unspecified, all objects except for the community-table and
SNMPv3 user and access tables are available.
writeview—Specifies a string that is the name of the view that enables entering data and
configuring the contents of the agent. If unspecified, nothing is defined for the write
view.
notifyview—Specifies a string that is the name of the view that enables specifying an
inform or a trap. If unspecified, nothing is defined for the notify view. Applicable only to
the SNMP Version 3 security model.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
284
SNMP Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents