Show Fiber-Ports Optical-Transceiver; Show Copper-Ports Cable-Length - Dell PowerConnect 3424 Cli Reference Manual

User Guidelines
• The port must be active and working in 100M or 1000M mode.
Example
The following example displays the estimated copper cable length attached to all ports.
Console> show copper-ports cable-length
Port Length [meters]
---- ---------------------
1/e1 < 50
1/e2 Copper not active
1/e3 110-140
1/g1 Fiber

show fiber-ports optical-transceiver

The show fiber-ports optical-transceiver Privileged EXEC command displays the optical
transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver [interface] [detailed]
Syntax Description
• interface — A valid Ethernet port. (Full syntax: unit/port)
• detailed — Detailed diagnostics.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
To test optical transceivers, ensure a fiber link is present.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
PHY Diagnostics Commands
233