Enable Authentication - Dell PowerConnect 3424 Cli Reference Manual

Syntax
login authentication {default | list-name}
no login authentication
• default — Uses the default list created with the aaa authentication login command.
• list-name — Uses the indicated list created with the aaa authentication login command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
• Changing login authentication from default to another value may disconnect the telnet
session.
Example
The following example specifies the default authentication method for a console.
Console(config)# line console
Console(config-line)# login authentication default

enable authentication

The enable authentication Line Configuration mode command specifies the authentication
method list when accessing a higher privilege level from a remote telnet or console. To return to
the default configuration specified by the aaa authentication enable command, use the no form
of this command.
Syntax
enable authentication {default | list-name}
no enable authentication
• default — Uses the default list created with the aaa authentication enable command.
• list-name — Uses the indicated list created with the aaa authentication enable
command.
Default Configuration
Uses the default set with the aaa authentication enable command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
76
AAA Commands