Radius-Server Retransmit; Radius-Server Source-Ip - Dell PowerConnect 3424 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example defines the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon.
Console(config)# radius-server key dell-server

radius-server retransmit

The radius-server retransmit Global Configuration mode command specifies the number of
times the software searches the list of RADIUS server hosts. To reset the default configuration,
use the no form of this command.
Syntax
radius-server retransmit retries
no radius-server retransmit
retries — Specifies the retransmit value. (Range: 1 - 10)
•
Default Configuration
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS
server hosts to 5 times.
console(config)# radius-server retransmit 5

radius-server source-ip

The radius-server source-ip Global Configuration mode command specifies the source IP
address used for communication with RADIUS servers. To return to the default configuration,
use the no form of this command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
261
Radius Commands