Boot System - Dell PowerConnect 3424 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• *.sys and *.prv files cannot be renamed.
Examples
The following example renames the configuration backup file.
Console# rename configuration.bak m-config.bak

boot system

The boot system Privileged EXEC mode command specifies the system image that the device
loads at startup.
Syntax
boot system [unit unit] {image-1 | image-2}
• unit — Specifies the unit number.
• image-1 — Specifies image 1 as the system startup image.
• image-2 — Specifies image 2 as the system startup image.
Default Configuration
If the unit number is unspecified, the default setting is the master unit number.
Command Mode
Privileged EXEC mode
User Guidelines
• Use the show bootvar command to find out which image is the active image.
Examples
The following example loads system image 1 at device startup.
Console# boot system image-1
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Configuration and Image Files
143